- Detail
- Parameters
- Review
Free shipping
Ta-152H 1/6 Kit (Without retract)
(Bigger kit using sea freight, need ca.1month delivery time)
If you want to purchase kit+ retract version, please click below:
Features:
1. As a Full kit, all wood parts (Including all covering balsa sheets, and All wood strips)included.
2. harewares included.
3. Detailed manual with 300+ photos. Building videos on Youtube.
4. Resin pasts: Cowl, Cockpit accessories pack(Panel; Chair; Control stick; sights) exhaust, Air intake included
5. Fiberglass parts*3: Landing gear accessories, the cover on the top of the front fuselage.
Specifications | |
Wing Span | 2.4m |
Wing Area | 63.68 sq dm |
Flying weight | 6.5kg-7.0kg |
Fuselage length | 1.7m |
Scale | 1 / 6 |
Requires |
RC transmitter with at least 7 channels |
Flaps: 43g Standard Servo(ES3001/AS549)*2 |
Aileron: 43g Standard Servo(ES3001/AS549)*2 |
Rudder&Elevator: 43g Standard Servo(ES3001/AS549)*2 |
Motor: GA2000 / 30cc Glow engine |
Tips: Building videos which you can make some reference:
https://youtube.com/playlist?list=PLobWZgnLsqbusNCAhUn_xfG7dL_BFiOqx&si=A3nOi6EvzTkcJpao
Blogs here: https://www.rc-network.de/threads/ta-152h-von-tony-ray.12082240/page-3
Click to download the online manual
Sheet Wood Inventory | ||
Item: | Mark | Quantity |
1.5mm balsa | G series:G1-G7 | 7 |
1.0mm Balsa | G series:G8 | 1 |
2.0mm balsa | C series:C1-C10 | 10 |
3.0mm balsa | H series: H1-H2 | 2 |
5.0mm balsa | F series:F1-F8 | 8 |
2.0mm Paulownia | D series: D1-D4 | 8 |
1.0mm Paulownia | E series: E1-E14 | 14 |
1.0mm Plywood | E series: E15-E17 | 3 |
2.0mm Plywood | A series:A1-A6 | 6 |
3.0mm Plywood | B series:B1-B13 | 13 |
2.0mm balsa | Unmarked covering sheets | 25 |
Wood Strips Inventory | |
5*5mm Balsa | 2 |
6*6mm Balsa | 4 |
6*6mm Pine | 30 |
2*6mm Pine | 20 |
Hardware | |
M4*5 Screws | 2 |
M3 Four Claws Nut | 6 |
M2*8 Screws (Spacer Version) | 30 |
M3*25 Screws | 6 |
M3 Screw nut | 4 |
Plastic Hinge | 22 |
Plastic Hinge columnar version | 16 |
M2 Steel push rod (Thread at both ends Length:35mm) | 2 |
M2 Steel push rod (Thread at both ends Length:25mm) | 2 |
M2 ball joint connector | 6 |
M1*3 Screws for panel | Ca.70pcs |
M2*10 Screws | 6 |
M2 Screw nut | 7 |
Plastic collet | 2 |
Rudder horn | 1 |
Mental slides module for canopy | 1 |
PVC Tube (Outer diameter: 3mm, Inner diameter: 2mm) | 0.5m |
Steel push rod(Diameter1.2mm ) | 0.5m |
Steel wire for rudder(Diameter1mm ) | 1m |
Aluminum sheet (200mm*200*0.3mm) | 2 |
Vacuum Formed Canopy | 1 |
Laser cut Pvc sheet for front canopy | 3 |
M5*50 Screws | 2 |
M5 Four Claws Nut | 2 |
M3.5*20 Screws (For landing gear) | 8 |
Tail wheel hook(Nylon) | 1 |
Tail wheel 1.75’’ | 1 |
M2*30 Screws | 1 |
Accessory parts | |
Cowl | 1 |
Air intake-main | 1 |
Air intake-mini | 1 |
Exhaust module | 2 |
“Z”shaped hook for cowl | 4 |
Tail wheel module(Nylon) | 1 |
Fiber glass parts | |
Cabin door of top fuselage | 1 |
Landing gear cabin door | 2 |
CNC Resin board for rudder horn,aileron horn | 1 |
Plans | |
1:1 plan | 3 |
Kit inventory:
Finished Kit:
Customer photos: